Avant- XVape

XVape Avant Dry Herb Vaporizer Features:

Integrated 1200mAh Lithium-Polymer Battery

Temperature Range: 356-428°F / 180-220°C

LED Indicator Light

Haptic Feedback

Safety Power Off

NTC Protection

Overheat Protection

Short Circuit Protection

To Use The XVape Avant:

1. Open the magnetic cap to expose the heating chamber, pack in ground herb material and put the cap back onto the device. Do not pack the heating chamber too tightly or severe draw resistance will occur.

2. Turn the vape on by clicking the power button 3 times. When first turned on, the device will light up with the battery level. (i.e. 5 lights means 100% battery charge, 3 lights means 60% battery charge, and 1 light means 20% battery charge)

3. To change the temperature setting, press and hold the power button. The LED lights will light up as the heat setting changes.

4. Once the temperature is at the desired setting, wait until the LED light turns solid to begin inhaling. No button pressing required, just inhale! The device will automatically turn off after 3.5 minutes from when it was turned on for heat safety.

5. After session is completed, wait until heating chamber has cooled down and use the included cleaning accessories to remove vaped material.

Cleaning and Maintenance

After each session, empty the ashes and clean the chamber to prevent buildup. To maintain high-quality performance, regularly clean the heating chamber and mouthpiece. Use a cleaning brush or cotton swab that's damp with isopropyl alcohol to remove residue.

Charging and Storage

When the battery runs low, recharge the device using the provided USB cable. When storing it, ensure the device is turned off and cleaned to avoid issues or damage.

Remember to always use the dry herb vapes responsibly and refer to the user manual for specific information and troubleshooting tips.